Cuprinol Garden Shades
£19.04 ex VAT (£22.85 inc VAT)
Cuprinol Garden Shades has been specially developed to colour and protect sheds, fences and other garden wood. Its special pigments ensure a rich colour and allow the natural texture of the woodgrain to shine through. It can also be applied on terracotta, brick and stone, to bring beautiful colours to the rest of the garden. This product is not suitable for use on decking
Only 1 left in stock (can be backordered)
Description
Features of Cuprinol Garden Shades
- Cuprinol Garden Shades offer 6 year weather protection on wood
- Beautiful matt colour enhances the grain of natural wood
- Suitable for wood, terracotta, brick and stone
- Can be applied by brush or spray
Coats
Coverage
Dry
Usage Guide
Prepare
All surfaces should be clean and dry. If it has been previously coated, loose, flaking paint should be stripped back to bare wood. Test a small area first for colour and adhesion.
Apply
MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION.
Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay.
Use a suitable primer before painting if applying on resinous timber to protect from tannin staining particularly in lighter colours.
Coverage per 1L:
- Smooth planed wood
- Brush: 10-12m2
- Spray: 4-5m2
- Rough sawn wood
- Brush: 3-5m2
- Spray: 2-3m2
Coverage can vary depending on application method and the condition and type of surface.
Brush:
Stir thoroughly, before and during use. Brush on product, evenly, along the grain.
Spray:
Stir thoroughly before pouring contents into the Cuprinol sprayer. Refer to the Sprayer user guide for full instructions before every use. Cover any nearby surfaces in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.
Dry
Cuprinol Garden Shades will be touch dry in 1 hour under normal weather conditions. On areas subject to wear, such as garden furniture, allow a few days before heavy use or contact with soft furnishings.
Clean
Reseal can after use. Clean up spills while still wet. After use, remove as much product as possible from brushes before cleaning with water. Do not store or use in extremes of temperature and protect from frost.
Aftercare
Surfaces painted with Cuprinol Garden Shades can be cleaned at regular intervals with a dampened, lint-free cloth or Cuprinol Garden Furniture Cleaner.
Only logged in customers who have purchased this product may leave a review.
Related products
-
18mm Marine Plywood (1220mm x 2440mm)
£65.71 ex VAT (£78.85 inc VAT) Add to basket -
5-6″/125-150mm Peeled Posts
£17.83 ex VAT (£21.40 inc VAT) Add to basket -
Osmo Anti-Slip Decking Oil (Satin) Clear (Topcoat) 2.5L
£72.00 ex VAT (£86.40 inc VAT) Add to basket -
Osmo Flat Brush 50mm
£5.71 ex VAT (£6.85 inc VAT) Add to basket -
47mm x 50mm (2×2) x 3.6m Treated Regularised Timber
£4.00 ex VAT (£4.80 inc VAT) Add to basket -
25mm x 50mm Treated Timber Laths (2 inch x 1 inch)
£3.26 ex VAT (£3.91 inc VAT) Add to basket
Reviews
There are no reviews yet.