2 Hole Hook On Plate

Name: 2 Hole Hook On Plate
SKU: 1892-12
Availability: InStock

£5.71 ex VAT (£6.85 inc VAT)

Heavy Duty Gate Hanging Hooks

These hooks are used by everyone from the expert fencing contractor to the normal DIY-er. Typically these hooks are used to hang garden gates and decorative gates which need a little more support from a heavy fixing. They are a good match if you currently have some ironmongery and need to match hooks to it.

The two hole hook on plate is most commonly used on round gate posts as it sits and fixes nicely in to the circular face. For square gate posts please see the four hole hook on plate which may be more suitable.

In stock (can be backordered)

SKU: 1892-12 Categories: Gate Fixings, Gates, Hooks and Latches, Ironmongery, Landscaping and Gardening, Tools and Hardware, W Burtons & Son Tag: Wooden Gates Hanging

Description

Produced from 6mm mild steel with a galvanised finish, which helps to prevent rust and rot the back plate measures 205mm by 48mm. This is a heavy duty hook on plate and is more than capable of hanging any gate up to 4800mm in length.

The metal plate at the back of the hook is predrilled for either a bolt or coach screw with a diameter of 10mm to 12mm. We recommend that the coach screws should be at 100mm long for gates over and above 3000mm and to use washers with them at all times. The hook suits a standard 19mm gate eye and the hooks length is 45mm long.

These hooks are supplied individually.